3 1/2" Sucker Rod Centralizer Stabilizer Centralizer

• Customization: Available
• Media: Water
• Temperature: Low Temperature
• Model NO.: 3 1 /2"
• Type: Direct-acting
• Material: Carbon Steel
• Connection Form: Flange
• Pressure: Low Pressure
• Actuator: Manual
• Seal Surface: Wedge Gate Valve
• Thread Position of Valve Rod: Inside Gate Valve
• Usage: Regulation, Safety, Emptying, Drain
• Standard: GB
• Application: Industrial Usage
• Product Name: High Quality Drilling Mud Sand Centrifugal Pump U
• Color: as Per Request
• Medol: 3 1/2" Sucker Rod Centralizer Stabilizer Centraliz
• Size: 3 1/2" Sucker Rod Centralizer
• Transport Package: Standard Export Packing
• Trademark: SEACO
• Origin: Shandong China
• HS Code: 84314310

Product Description

3 1/2" Sucker Rod Centralizer stabilizer centralizer

 

Product Description

3 1/2" Sucker Rod Centralizer Stabilizer Centralizer
Specifications

1. API standard.
2. ISO certificate.
3. Register with Sinopec.
4. Technical service.
5. Professional service for export.

Products: Sucker rod stabilizers

Product Name: sucker rods stabilizer

Size: OD from 80 to 136mm

Suitable for pipe pf ID from 3-1/2'' to 6''

Series of sucker rods stabilizers include sucker rods (Nylon) stabilizer, helix pup joint stabilizer, Anti-corrosive (carbon fiber) stabilizer and active pup joint type stabilize

  

It is recommended that centralizers be used on the rods for reduction of rod string and oil well tubing wear. The centralizers can be fixed; they can be installed directly on the rod body by pressure die casting method. The rotating centralizers are located between the locks on the rod body and can rotate on the same. Apart from ensuring wear protection, centralizers prevent deposits formation inside oil well tubing and increase the time between well overhauls.
 

Item	Specification	Technical Requirements	PA66
1	Testing Item	Smooth and Without Damage	Smooth
2	Bending Strength Mpa	>=103	242.46
3	Notch Impact Strength	>=13	27.66
4	Friction Coefficient μ	<=0.018	0.0173
5	Heat Distortion Temperature ºC	>=180	220.85
6	Wear Volume Loss g/cm³	>=0.073	0.0049
7	Density kg/cm³	1.3-1.4	1.4
8	Tensile MPa	/	123.05
9	Compactness	/	1500

 

PPA Resin

Item	Specifications	Technique Data	PPA Resin
1	Appearance	Smooth and Without Damage	Smooth
2	Bending Strength Mpa	>=103	352.26
3	Notch Impact Strength	>=13	13
4	Friction Coefficient μ	<=0.018	0.1845
5	Heat Distortion Temperature ºC	>=180	275.5
6	Wear Volume Loss g/cm³	>=0.073	0.0182
7	Density kg/cm³	1.3-1.4	1.4
8	Tensile MPa	/	208.87
9	Compactness	/	1500

 

Found Petroleum Equipment Co., Ltd.Mill Test Certificate

Product

Centralizer

Pcs

2

Delivery

01.16.2015

Certidicate No.

F20150116

Company

Found Petroleum Equipment Co., Ltd.

Contract No.

/

/

Specification

API 10D

Aperance Testing

Size

Pcs

Outside Diameter

Inner Diameter

Length

7/8"

1

58mm

7/8"

200mm

7/8"

1

58mm

7/8"

200mm

Tensile test

Material

Standard Value

Temperature- resistance

HRC

Impact Strength

Compressive Strength

0ºC-200ºC

M85-M114

3.5-4.8KJ/m²

70-100Mpa

HTN51G35HSLR

Measured Value

176ºC

93

3.9

92

HTN53G50HSLR

Measured Value

187ºC

98

4.2

88

Note: 1. A certificate to the original shall be prevailed, copy is invalid. 2. Item to write clearly, and do a single code. 3. There are ten days of feedback, and timely service. 4. Implement of API 10D standard, the warranty period of one year.

Issued by

/

Auditor

/

Detailed Photos

SEACO Oilfield Equip,is manufacturer & stockist of equipments,services and solutions to the upstream to downstream in oil & gas industry.We are aimed at helping customers to obtain the maximum from their each well.Providing our customers superior quality at the best value for products and services in order to ensure our customers' continued satisfaction.

 

Our main range include but not limited below:

 

1).Rig packages: 250hp to 3000hp Land drilling rigs; Workover rigs(Fast-moving rigs are available).

 

2).Rig components: Crown block;Travelling block; Hook; Swivel; Rotary table; Drawwork; Driller's cabin; MCC/SCR house; MCC/VD house; Top drive ect...

 

3).Wellhead & Pressure control equipments: BOP; Chock & Kill manifold; Pressure hoses; BOP closing unit; Casing&Tubing head; X-Mas tree; Valves; Spools and flanges ect...

 

4).Solid control & Mud system equipments: Shale shaker; Desander; Desilter; Mud cleaner; Hopper; Centrifuge; Agitator; Mud tanks; Unions,ect...

 

5).Tubulars & Drilling strings: Drill pipe; HWDP; Drill collar; Kelly; Casing; Tubing; Pup joint; Sucker rod; Line pipes ect...

 

6).Tubular Running and handing tools: Elevator; Slip; Manual/Power tong; HPU; Bushing; Spinner; Bit breaker; Spider; Links; Stuibing guide; Thread protector ect...

 

7).Downhole/Fishing tools: Drilling & Fishing jar; Stabilizers; Hole opener; Overshot; Drilling bit ect...

 

8).Cement tools: Cement unit;Float collar; Float shoe;Liner hanger;Cement head ect...

 

9).Others: Air winch; Drilling line; Safety equipments; Mud pump spare parts; Rig parts; Fittings ect...

 

10). Commissioning and other services.

 

Quality Control:

 

Quality admits no compromises.For this purpose.we exercise strict control on the starting materials.We ensure our equipments are manufactured to the international standards,producing per API,ISO or/and other applicable quality standards.We accentuate QA and QC monitoring & control processes to guarantee the quality.Our efforts is for providing the Customers with the peace of mind that when the equipment arrives on location,it is ready to go to work,and it will perform reliably.