| Customization: | Available |
|---|---|
| Standard Component: | Standard Component |
| Technics: | Casting |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Oil Field Drilling Mud desilter and Cyclone Desander
Built on API RP 13C, with the certificate of authority to use the official API monogram.
oil field Oil and Gas Drilling Fluid Desander is important equipment for drilling liquid solid control. It is mainly used for the second phase purification of drilling liquid. It removes nocuous solid, stabilizes drilling liquid properties and improves drilling efficiency. The hydrodynamic cyclone of the desander is made of wear resistant cast iron. It is reliable, effective and serves long. The content of sand after the desander is controlled below 0.15%.
As a solids control equipment of the second stage in drilling operation, oil field Oil and Gas Drilling Fluid Desander is used to remove harmful solid particles of 40-74µm in drilling liquid. Suspending particles can be separated from the liquid under the centrifugal acceleration, by use of working principle of centrifugal subsidence.
At present time, four types, ZQJ300×2/ZQJ250×2 and ZQJ300×1/ ZQJ250×1,are available. The former applies to over 3000-meter-long drills, and the latter applies to small drills of less than 3000 meters and service rig.
SEACO Oilfield Equip,is manufacturer & stockist of equipments,services and solutions to the upstream to downstream in oil & gas industry.We are aimed at helping customers to obtain the maximum from their each well.Providing our customers superior quality at the best value for products and services in order to ensure our customers' continued satisfaction.
Our main range include but not limited below:
1).Rig packages: 250hp to 3000hp Land drilling rigs; Workover rigs(Fast-moving rigs are available).
2).Rig components: Crown block;Travelling block; Hook; Swivel; Rotary table; Drawwork; Driller's cabin; MCC/SCR house; MCC/VD house; Top drive ect...
3).Wellhead & Pressure control equipments: BOP; Chock & Kill manifold; Pressure hoses; BOP closing unit; Casing&Tubing head; X-Mas tree; Valves; Spools and flanges ect...
4).Solid control & Mud system equipments: Shale shaker; Desander; Desilter; Mud cleaner; Hopper; Centrifuge; Agitator; Mud tanks; Unions,ect...
5).Tubulars & Drilling strings: Drill pipe; HWDP; Drill collar; Kelly; Casing; Tubing; Pup joint; Sucker rod; Line pipes ect...
6).Tubular Running and handing tools: Elevator; Slip; Manual/Power tong; HPU; Bushing; Spinner; Bit breaker; Spider; Links; Stuibing guide; Thread protector ect...
7).Downhole/Fishing tools: Drilling & Fishing jar; Stabilizers; Hole opener; Overshot; Drilling bit ect...
8).Cement tools: Cement unit;Float collar; Float shoe;Liner hanger;Cement head ect...
9).Others: Air winch; Drilling line; Safety equipments; Mud pump spare parts; Rig parts; Fittings ect...
10). Commissioning and other services.
| FAQ |
| Q: How can I place order? |
| A:You can contact us by email about your order details, or place order on line |
| Q: How can l pay you? |
| A:After you confrm our Pl, we will request you to pay.T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using |
| Q: What's the order procedure? |
| A: First we discuss order details, production details by email or TM. Then we issue you an Pl for your confirmation.You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been fnished,we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. |
| Q:How do you take care when your clients received defective products? |
| A:replacement. If there are some defective items, we usually credit to our customer or replace in next shipment. |
| Q: How do you check all the goods in the production line? |
| A:We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure. |
){kind=link}