| Customization: | Available |
|---|---|
| After-sales Service: | on Site on Line |
| Warranty: | 12 Months, 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
5 1/2" Hydraulic Stage Cementing for Oil Drilling
Oilfield stage cementer
Multiple-stage cementing tools allow for selected intervals around the casing string to be cemented at separate times or in stages. Two-stage cementing is the most common of the multiple-stage cementing techniques, but a three-stage method can be used. New technologies and techniques have led to the use of lightweight cement solutions in some situations that would conventionally call for multiple-stage cementing.
5 1/2" Hydraulic Stage Cementing for Oil Drilling
Features
1. Opening pressure can be adjusted and it is not affected by the hole angle or mud properties for operation.
2. The pressure-relief design prevents fluid trapping and compression during the closing phase of the tool's operation.
3. The I.D. of upper/lower sub is the same as that of casing, but smaller than that of closing sleeve, which can minimize chances of damages to the closing sleeve.
4. The inner seats are made of an easily drillable butyronitrile rubber/aluminum material. Both the opening and closing seats lock against rotation for easy drillout.
5 1/2" Hydraulic Stage Cementing for Oil Drilling
|
Specifications |
φ139.7mm |
φ177.8mm |
φ244.5mm |
|
Max. O.D. (mm) |
170 |
208 |
283 |
|
Drill-out I.D. (mm) |
122 |
155 |
220 |
|
Overall Length (mm) |
1082 |
1182 |
1222 |
|
Rated Load (mm) |
140 |
170 |
210 |
|
Sealing Capacity (MPa) |
25 |
25 |
25 |
|
Opening Pressure (MPa) |
18 |
18 |
18 |
|
Opening Force (KN) |
85 |
136 |
278 |
|
Closing Pressure (MPa) |
5 |
5 |
5 |
|
Closing Force (KN) |
60 |
97 |
199 |
|
Lower Sliding Sleeve I.D. (mm) |
85 |
115 |
176 |
|
Upper Sliding Sleeve I.D. (mm) |
95 |
125 |
197 |
){kind=link}