| Customization: | Available |
|---|---|
| Manufacturing Process: | Forging |
| Surface Treatment: | Spray-Paint |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
35-35 API Choke Manifold for Oil Well Control Manifold 5000PSI
cheap choke manifold for oil well control made in China
35-35 API Choke Manifold for Oil Well Control Manifold 5000PSI
Features:
1, use
Throttle manifold is to control the kick, the implementation of necessary equipment for oil and gas Wells pressure control technology. In bop closed condition, using the throttle valve opening and closing, control a certain casing pressure for bottom hole pressure is always slightly greater than the formation pressure, avoid further formation fluid into the well. In addition when implementing shut-in, available throttle manifold pressure to achieve soft shut-in. When the borehole pressure rises to a certain limit, wellhead choke to through it.
2, the structure
Throttle manifold by a throttle valve, gate valve, pipe, pipe fittings and pressure gauge, etc, see above parts and the throttle valve and gate valve.
3,The throttle manifold
When the pressure in well, through the throttle on the manifold throttle valve (manual adjustable, hydraulic type and fixed type three) to release the borehole fluid opened and closed to control the casing pressure. Casing pressure can be put directly by gate valves are high.
4, the throttle manifold specifications
I company throttle manifold pressure level is divided into five, namely, 14 Mpa, 21 Mpa, 35 Mpa and 70 Mpa and 105 Mpa. Can also be designed according to customer requirements.
5, use requirement
(1) the throttle manifold all parts working pressure should be combined with the blowout preventer used working pressure to match;
(2) the throttle manifold shall be installed in the operator accessible places, when installation, must test, seal test pressure shall be equal to the rated working pressure;
(3) the pipeline should be as flat as possible true, pipe bend should use 120 - degree just bent pipe casting. Line should be large enough diameter;
(4) must be put working pressure gauge;
(5) the winter construction, energy-saving should be under the condition of low temperature performance of the work.
35-35 API Choke Manifold for Oil Well Control Manifold 5000PSI
| FAQ |
| Q: How can I place order? |
| A:You can contact us by email about your order details, or place order on line |
| Q: How can l pay you? |
| A:After you confrm our Pl, we will request you to pay.T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using |
| Q: What's the order procedure? |
| A: First we discuss order details, production details by email or TM. Then we issue you an Pl for your confirmation.You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been fnished,we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. |
| Q:How do you take care when your clients received defective products? |
| A:replacement. If there are some defective items, we usually credit to our customer or replace in next shipment. |
| Q: How do you check all the goods in the production line? |
| A:We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure. |
){kind=link}