5 1/4" Evolution Beam Pump Downhole Gas Separator

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: 5 1/4" Evolution Beam Pump Downhole Gas Separator
• Certification: ISO 9001:2008
• Condition: New
• Transmission: Gas
• Pumping Way: With Rod
• Type: Tubing
• Casing Od: 1"-25"
• Tool Od: 2-20"
• Tool Length: 1-10"
• Volume: 0-200m3
• Transport Package: Mud Box
• Specification: 100*100*50
• Trademark: seaco
• Origin: China
• Package Size: 150.00cm * 250.00cm * 30.00cm
• Package Gross Weight: 40.000kg

Product Description

Product Description

5 1/4" Evolution Beam Pump Downhole Gas Separator

The vortex gas separator, Fig. 12.31, also uses centrifugal force to separate the fluids according to the fluid gravity. The denser, high-specific gravity fluids, are forced against the separator wall, and lighter, low-specific gravity fluids, are left around the shaft. The vortex separator creates a vortex in the separation chamber with a spinning paddle set above the inducer or high-angle vane auger. One advantage is that separation occurs without the additional weight of the spinning chamber. The vortex separator will also have a higher maximum throughput rate than the rotary. Fig. 12.32 gives a general idea of liquid throughput versus percentage of free gas that can be separated. Notice that the separation efficiency is 0% at the maximum liquid rate. There is no room for free gas to enter the separator. If the total flow of oil, water, and gas is greater than the maximum liquid rate, then this will begin to cause a choking effect on flow through the ESP and the P_ip will increase, reducing the free gas, until a stable operation point is found.

Casing OD (in/mm)	Tool OD (in/mm)	Tool Length	Connections	Daily Production Volume (m3)
7 (177.8)	5.25 (133.4)	Min 2.5 m	3 ½"  fox	50-60

Detailed Photos