High Pressure Explosion-Proof Plunger Pump Enr Zk-125/50

• After-sales Service: on Site on Line
• Warranty: 12 Months
• Structure: Axial Plunger Pump
• Cylinder Number: Multi Cylinder
• Drive Mode: Mechanically Driven Pump
• Working Pressure: 35MPa
• Model NO.: ENR-ZK 125/50
• Transport Package: Wooden Case
• Trademark: SEACO
• Origin: China
• Production Capacity: 500 PCS/Year

Product Description

Product description
 

No.	Name	Part no.	unit	qty
1.	Pump assembly ZP ENRZK- 125/50 SM (complete with electric motor, frame and suspension platform). suspension platform).	HG-11- 115-М1- 010	pc	1
2.	MPI WPS ACS-A1 Control Controller	-	pc	1
3.	Set of hoses and piping connections for internal strapping of the pumping unit with the tank	-	pc	1

Technical requirements

The control kit should be based on a microprocessor controller of the MPI WPS ACS-A1 type and software that is shared and interchangeable with the one already working at the mine.
Products according to their characteristics comply with: design documents and catalog numbers of the equipment manufacturer. Have a permit for use in mines dangerous for methane gas and (or) dust.
 

parameters		Indicator	Noted
Working pressure	MPa(bar)	35(350)
Rated performance	l/min	202
Pump design	-	Flanged
Pump plunger diameter	мм	50
Number of plungers	PC	3
Liquid	-	Low-percentage water-oil emulsion
Max, liquid temperature	Hail .	45
The fineness of filtration	мк	No more than 100
Supply voltage, frequency	V, Hz	1140,50
Electric motor power	kW	132

Sketches

ENR-ZK 125/50 pump assembly;
controller MPI WPS ACS-A1 controls






 

FAQ

Q: How can I place order?

A:You can contact us by email  about your order details, or place order on line

Q: How can l pay you?

A:After you confrm our Pl, we will request you to pay.T/T (HSBC bank) and Paypal,
Western Union are the most usual ways we are using

Q: What's the order procedure?

A: First we discuss order details, production details by email or TM. Then we issue you an
Pl for your confirmation.You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been fnished,we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

Q:How do you take care when your clients received defective products?

A:replacement. If there are some defective items, we usually credit to our customer
or replace in next shipment.

Q: How do you check all the goods in the production line?

A:We have spot inspection and finished product inspection.
We check the goods when they go into next step production procedure.